Riding the ERCOT Roller Coaster: A Review of Market Signals & what to watch as summer winds down

smaller roller coaster-01.png

The last few weeks of August have been a roller coaster in ERCOT. The ISO issued two Energy Emergency Alerts (EEA1) after not issuing one for nearly five years. The week of August 12th RT prices at North Hub printed over $8,000 three days and on peak prices averaged over $1500 two days. The week of August 19th was mostly quiet, but Thursday saw a few $2000-plus prints. We looked at how to predict this market volatility using Live Power and other market data accessible in the Yes Energy product suite.

Using Live Power Data to Predict Market Volatility

Using Live Power data and the results of our previous analysis, a pattern emerged that helps us predict the timing of large price spikes. T.H. Wharton consistently ramps several hours before the largest prints. Stryker Creek and DeCordova ramp much closer to the price blowouts. DeCordova has been a particularly strong indicator. During the wild week of August 12th there were two days when prices peaked at ‘only’ $2,000. On those days DeCordova ramped to less than 10% of capacity. 

The week of August 19th ERCOT was quieter, but Stryker Creek and DeCordova remained a strong signal. Strkyer Creek was off Monday and Tuesday when the highest prints were in the $200-$250 range. DeCordova was off Wednesday and Friday. The only day they both ramped was Thursday when we saw those $2,000 prints. These plants will be ones to watch through late summer in ERCOT. 

Using Other Market Data to Signal When ERCOT Market Volatility Will Occur 

Individual pieces of market data such as Load, Wind, and Reserve Indicators including Capacity Available to Increase SCED (Cap Inc. SCED) can all be useful in alerting market participants when the ERCOT market is getting tight and prices may be about to rise, see the below chart from the week of August 12. 

*ERCOT HASL - The maximum capacity a Generation Resource may be dispatched while maintaining its scheduled ancillary services. Calculated as the High Sustained Limit (HSL) minus the Ancillary Service Schedules for Responsive & Non-spin minus Ancillary Services Responsibility for Reg-up.

However you can create even more intelligent signals using our Formula Series and Multi Conditional Alerting capabilities in Quicksignals.

Instead of keeping an eye on Load, Wind, and Cap Inc. SCED separately, we can create a custom data series of Load-Wind in Formula Series and then using our Multi-Conditional alert functionality, set up the alert (detailed below*) that will let you know every time the market is getting tight in ERCOT and North Hub prices are about to rise.

*Multi-Conditional Alert Settings:

Condition 1: Load - Wind > 62,000 MW

Condition 2: Cap Inc. SCED < 2,800 MW

ERCOT Signal Now Even Quicker in QuickSignals

ERCOT ORDC image-01.png

Summary

Yes Energy has applied TradeNOW technology to ERCOT’s ORDC Adder. This data is now flowing faster to all QuickSignals dashboards. The ORDC is usually posted before LMP so having this data coming in as fast as possible is extremely important for ERCOT BalDay traders. 

What is the ERCOT ORDC Adder?

The ERCOT Operating Reserve Demand Curve (ORDC) Adder is an ERCOT-wide price adder that the ISO adds to all LMPs to incentivize new generation to come online during times of scarcity. 

The ORDC adder is made up of two separate adders, the Online Reserve Price Adder (ORPA) and the Online Reliability Deployment Price Adder (ORDPA). The ORPA was implemented in mid-2014 to account for the value of reserves based on the probability of reserves falling below the minimum contingency level and the value of lost load. The ORDPA was implemented in June 2015 as a mechanism to ensure that reliability deployments do not distort the energy prices.The ORPA is the more active of the two adders by far. Thus, the all-in LMP in ERCOT consists of the LMP + ORPA + ORDPA. 

Previously, only the LMP + Adders data for ERCOT Hub North was available in Yes Energy with faster TradeNOW speed. Now all of the components of ERCOT Hub North LMP are available, LMP, ORPA Adder, and ORDPA Adder.

If you are a QuickSignals customer all you need to do is make sure you have the correct data in your dashboard.

Table 1. Data type definitions for ERCOT Price Adder series that are now delivered using TradeNOW technology.

Table 1. Data type definitions for ERCOT Price Adder series that are now delivered using TradeNOW technology.

Not a QuickSignals customer? Click here to learn more!



Determining which ERCOT Power Plants to Watch this Summer: The Leading Indicators of Scarcity Prices -- updated 7.2019

ercot graphic-01.png

With ERCOT once again facing tight reserve margins, traders are turning their eyes to where the generation could fall short on days with high load. Yes Energy tasked our chief economist, Dr. Scott Holladay, to dig into our data. He found some key areas where traders should be focusing their attention this summer.

Background:

In March, ERCOT released its preliminary Seasonal Assessment of Resource Adequacy (SARA) report for Summer 2019. The report stated that “In all of the scenarios studied, we identified a potential need to call an energy alert at various times this summer.” An alert allows ERCOT to call for actions to alleviate the lack of generation capacity including:

  • demand response products

  • tapping neighboring regions for generation

  • asking consumers to conserve energy

ERCOT also has two Real-time energy price adders it can use to incentivize generation when reserves are low. Real-time adders have been assessed in less than half the days over the past year. Of the days where Real-time adders were applied, only 35 had adders that exceeded an average of $1/MWh over the full day. That small bucket of days had an outsized impact on PnL. Over the last year, Hub North has exhibited an average day-ahead bias of $3.30/MWh. Filtering to days with adders above $1/MWh on average across the entire day, Hub North had a Real-time bias of $0.50/MWh. As the adders increase to $10/MWh, that average Real-time bias grows to $20 per MW/h.

Using ERCOT Security Constrained Economic Dispatch (SCED) data, we can identify the relationship between generation and ERCOT adders. SCED data is the real-time market evaluation of offers to produce a least-cost dispatch of online resources. Some plants ramp in anticipation of an energy alert. Ramps at those plants indicate big adders are on the way. Other plants may curtail output, leading to an energy alert and big adders. With detailed generation and price data, it is easy to pick out the signals that adders are coming to the market.

However, ERCOT SCED data is released on a 60 day lag, so the relationships in the data might be easy to find, but they are hard to trade on. Using Live Power’s 1 minute generation data, traders can get a signal that the plants at the top of the gen stack are ramping and adders are likely on the way.

Correlation Arrow Image one color-01.png

Research & Findings:

Dr. Holladay leveraged Yes Energy’s DataSignals API and vast database to build a dataset to analyze in Python. He queried two years of SCED data for 21 key generators in ERCOT along with the ERCOT Price Adders. With this data, he computed the relationship between changes in the generation at the ERCOT power plants and the presence and strength of price adders.

The relationships were broken down into three categories: 15 minute, 30 minute and 60 minute. These categories indicate the relationship of the time from ramp to the price adders occurring. The 15 minute measures the relationship between changes in generation over the previous 15 minutes and the change in Real-time adders over the next 15 minutes. The 60 min score measures the relationship between a plant’s ramp over the past hour and Real-time adders. The higher the score, the stronger the correlation between changes in generation and changes in Real-time adders.

Plants with a high one hour score tend to ramp before the adders come in, providing a leading indicator to traders. Plants with a high 15 minute score tend to ramp shortly before adders enter the market. Plants with scores near zero don’t have a strong relationship with Real-time adders, so their changes in generation don’t provide much information. TH Wharton has a relatively high 60 minute score, but a low 15 minute score because it ramps to full capacity well before the adders come in.

According to Dr. Holladay’s research, here are four ERCOT Plants that give the best signal on future adders:

 
UPDATED Table for Post-01.png
 

Table 1: ERCOT plants that give the best signal on future adders. The 15 min score reports the correlation between changes in plant generation in the last 15 minutes and changes in adders in the next 15 minutes. The 30 minute score is the correlation between changes in generation over the last 30 minutes and changes in adders in the next 15 minutes. DeCordova is a newer plant monitored by Live Power and has recently been added to this table as it is a strong indicator of adders happening soon. Plants like VH Braunig and Strkyer Creek with high 60 minute scores are ramping well before adders come in.


HISTORICAL EXAMPLES:

Using our Time Series Analysis module, we were able to capture some recent examples of these relationships. Here’s a look:

Chart 1: Two recent examples of the correlation between Stryker Creek and Price Adders highlighting Stryker Creek’s strong correlation across all time categories

Chart 1: Two recent examples of the correlation between Stryker Creek and Price Adders highlighting Stryker Creek’s strong correlation across all time categories

Chart 2: A recent week in May that shows the strong correlation between V H Braunig and the Real-Time Adders.

Chart 2: A recent week in May that shows the strong correlation between V H Braunig and the Real-Time Adders.

Chart 3: T H Wharton’s correlation shows up the strongest after a longer time after ramp up as these recent examples show.

Chart 3: T H Wharton’s correlation shows up the strongest after a longer time after ramp up as these recent examples show.

5 Valuable Alerts for Power Traders this Summer

Power Traders are skilled at consuming large amounts of fast-paced data followed by making fast decisions. A critical tool for catching the “right” market signals are smart alerts.  Alerts that let traders know the moment certain conditions have been met and a trading opportunity is possible.

Alerting on a single condition can be useful and might be a tool that many traders use. But being able to set up alerts that are based upon multiple conditions means that traders can better filter out “false alarms” or just basic noise. Afterall, trading strategies are rarely dependent on one single criteria but a multitude of possible market drivers.


Here are 5 alerts we’ve set up using the Alerting function in QuickSignals but you could use the same parameters to set up alerts in whichever software solution you’re using to be alerted. These alerts help Power Traders filter out the noise and be the first to know when a market signal has appeared.

  1. ERCOT is at Risk of Energy Volatility

  2. Congestion is Directly Affecting PJM West Hub Prices

  3. Forecast Errors Reach a Set Limit

  4. Load & Wind Relationship Criteria

  5. Generation Ramp Indicates Changes in PJM West Hub RT LMP

Read on to learn how to implement these valuable alerts!


Alert #1: ERCOT is at Risk of Energy Volatility

This alert will let you know when there is risk of energy volatility in ERCOT and an increased potential scarcity pricing.

When the Capacity with Energy Offer Curve Available to Increase SCED Base Points (reported in MWs) crosses below 3000 and the total Regulation up Service* that has not been deployed (reported in MWs) crosses below 100 there is an increased risk of volatility. When these conditions occur, Traders will be alerted and can then dig in to determine if making changes in their positions is necessary.

Alert Type: Multi-Conditional

  • Condition #1: ERCOT Cap w/offer IncSCED <3000

AND

  • Condition #2: ERCOT Undeployed Reg-up <100

*The Regulation Up is an Ancillary Service that provides capacity that can respond to signals from ERCOT within five seconds to respond to changes in system frequency. Such capacity is the amount available above any Base Point but below the HSL of a Generation Resource and may be called on to change output as necessary throughout the range of Capacity available to maintain proper system frequency. A Load Resource providing Reg-up must be able to increase and decrease Load as deployed within its Ancillary Service Schedule for Reg-up above the Load Resource’s LPC limit.

Alert 1.gif

Alert #2: Congestion is Directly Affecting PJM West Hub Prices

PJM Traders will want to set this alert up to stay on top of changes in West Hub LMP that are related to congestion. Using the difference between the Real-Time LMP for Western Hub and the value of the Western Hub Tick Predictor, traders can stay on top of when there is a large discrepancy between the current and predicted next tick.  When seconds matter to your decision making, this alert can ensure you look up at your Dashboard to make fast trades.

Alert Type: Spread Value

  • Spread Value #1: PJM Western Hub LMP-RT

  • Spread Value #2: PJM Western Hub Tick Predictor *

  • Condition: Spread Value percent change increases or decreases by 5%.

    *A Yes Energy calculation using 15 second dispatch rates to calculate the next 5 minute price.

Alert #3: Forecast Errors Reach a Set Limit

Wind / Load Forecast errors for ERCOT, SPPISO & MISO can be catastrophic for portfolios. This alert provides insight into how accurate (or inaccurate) forecasts are shaping up in real time. This example uses SPPISO Wind Forecast but this same alert could be applied for any other type of forecast or ISO.

Alert Type: Single Value

Formula:

(100)(A-B)/B with the following variables:

A = SPPISO Real-Time Load

B = SPPISO Forecast Load

Once this Formula Series is created, you can then set up an Alert for when this error meets the set criteria. The level of error that is worthy of an alert will depend upon the selected data series (Wind, Load, Weather etc) and the ISO. Here’s an example for Wind Error:

  • Single Value: Wind Error Alert (created using the Formula Function above)

  • Condition: Threshold < 0 (indicates wind is coming in below forecast)

*Pro Tip: There are many variations of this that could be useful, including, for example, Load Forecast Error between zones in ERCOT to help predict congestion potential (i.e. North -> Houston)

Alert #4: Load & Wind Relationship Criteria

This Alert is especially useful for SPP, MISO & ERCOT where wind can make or break a position. For this alert you will establish thresholds for both wind and load to let you know when the wind is low and load is high.

Alert Type: Multi-Conditional (ERCOT example)

  • Condition #1 - Load - Real-Time Actual > 65,000 MW

AND

  • Condition #2 - Wind Real-Time Generation < 2,000 MW

Alert #5: Generation Ramp Indicates Changes in PJM West Hub RT LMP

Generators ramping up or down can indicate a potential change in pricing. For this example we have identified a generator that, when it ramps, often indicates changes in PJM Western HUB Real-Time LMP. Setting the alert using Live Power Real-Time 1 minute generation data ensures that you know the minute a generator begins to ramp giving you a jump on your decision making.

Alert Type: Multi-Conditional

  • Condition #1 -Western HUB Real-Time LMP > 75$/MWh

AND

  • Condition #2 - Bath Co Real-Time Generation > 0 MW

Greenhat Fallout: Is Your Company Ready?

  • Your FTR Risk:

    • Do you understand it?

    • Can you document and replicate your reporting?

    • Do you understand your changing credit requirements?


Miss our last blog post on the GreenHat Default? Click here for GreenHat Summary

In 2018, GreenHat Energy LLC defaulted on one of the largest FTR portfolios in PJM’s history, causing a projected loss of $185 to $430 million. PJM hired independent consultants to investigate the GreenHat default. In their report, the consultants were extremely critical of PJM’s ability to manage the financial risk in its FTR markets.

This report recommends several organizational changes focused on improving PJM’s risk oversight. This includes:

  • Establishing the position of Chief Risk Officer over financial markets

  • Creating the Financial Risk Mitigation Senior Task Force (FRMSTF) to evaluate the updates to market rules and participant facing changes

  • Increasing the number of long term auctions for better transparency into contract valuations

  • Adding Mark-to-Auction valuations for intra-auction collateral changes

  • Changing protocols to include more stringent Risk Management requirements for Market Participants

  • Increasing due diligence requirements for all new (and potentially current) Market Participants

Yes Energy can help you increase transparency and improve upon your current FTR risk management processes, while also making sure you stay ahead of any changes PJM might make in the wake of this incident.

Better Understand FTR Metrics around Risk, Credit, and Valuation:

RiskSignals (UI Only) traders can create, edit, and run our pre-built models and then export reports

  • Credit

  • Worst Week

  • VaR

  • Mark-to-Market

Access to these models can be allocated to traders, risk managers and any other reporting role in your organization, increasing transparency for everyone involved.

Blog Post Image 1.png

Provide a Documented and Replicable Third Party Risk Assessment System

A fully automated reporting solution produced by Yes Energy provides a third-party risk assessment system that includes:

  • Pre-Submission and Post-Clearance Automated Risk Reports

  • Pre-Submission and Post-Clearance Automated Credit Reports

  • Mark-to-Market Reporting for forward positions

Email image 2.png

Access to Risk Tools and Automated Reporting Tools for all FTR Transactions:

Get access to both of these tools across your organization - the User Interface and “set it and forget it” automated reporting for pre and post submission reports.